How To Change Code On Schlage Lock Keypad. That is, you can reset a schlage lock without the programming code as long as you can reach the lock interior and exterior assembly. The schlage keypad locks are perfect for use on front doors, garage entry doors, and side and back doors.
Just like any other system, it needs to be told that it is about to receive the new key code. See restore factory settings on page 15. Track your codes the smart way.
Table of Contents
That Is, You Can Reset A Schlage Lock Without The Programming Code As Long As You Can Reach The Lock Interior And Exterior Assembly.
Via the keypad, enter the existing programming code (the one you want to change) and wait for three orange lights from the schlage button, followed by three beeps. Wait until you get the three lights and three beeps again. Just like any other system, it needs to be told that it is about to receive the new key code.
Visit The Access Code Screen By Tapping The People Icon At The Bottom.
Enter your new user code, which consists of four digits. 4 tips for using your schlage keypad safely and effectively; Press the lock icon on the exterior side of the lock to secure the deadbolt from the touchscreen.
Preparing The System Of The Lock To Accept The New Key Code.
Schlage connect, schlage touch, schlage sense. Pushing the shlage button and the 1 key primes the lock to accept a new entry code.recommend electronic locks and change a code not keys if you sense managing keys is becoming a challenge for your customer, you may want to recommend a schlage keypad lock.reconnect the battery and wait until is no longer lit.schlage button (on front of lock) add a. You need to locate the master code for the lock.
If You Need A Home Inspection In Charlotte.
How to change the default programming code. An amber or orange flashing light indicates the lock is ready to program. See restore factory settings on page 15.
The Keypad Will Let You Know That It Is Ready To Enter The Code By Turning Blue.
On the keypad, enter your schlage lock default programming code and wait for the schlage button to illuminate three orange lights and the lock beep three times. Finally, enter your new user code again. To do this on schlage locks, you will have to press the “schlage” button while also pushing the number one on the pad at the same time.